www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
GPS NAVIGATOR
Model GP-170
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATIONS......................................................................................... ii
EQUIPMENT LISTS........................................................................................................ iv
1. MOUNTING..............................................................................................................1-1
1.1 Display Unit........................................................................................................................1-1
1.2 Antenna Unit ......................................................................................................................1-3
2. WIRING....................................................................................................................2-1
2.1 Grounding ..........................................................................................................................2-1
2.2 External Equipment............................................................................................................2-2
2.3 MAIN Board .......................................................................................................................2-2
3. ADJUSTMENTS ......................................................................................................3-1
3.1 Checking Operation ...........................................................................................................3-1
3.2 Beacon Setup ....................................................................................................................3-3
3.3 DGPS Operation Checking................................................................................................3-7
3.4 Ethernet Setup...................................................................................................................3-8
3.5 Input/Output Signal ..........................................................................................................3-10
3.6 Sound Test.......................................................................................................................3-19
3.7 How to Set Dual Configuration.........................................................................................3-19
APPENDIX 1 DIGITAL INTERFACE (IEC 61162-1 EDITION 4 (2010-11))..............AP-1
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWINGS ................................................................................................ D-1
INTERCONNECTION DIAGRAMS.............................................................................. S-1
To Next Page
