Furuno GP-170 - Beacon Setup; Manual Beacon Setup; How to Set the Differential Corrections to Use

3. ADJUSTMENTS
3-3
7. Press the MENU/ESC key to close the main menu.
3.2 Beacon Setup
The default setting is "automatic".
GP-170 can automatically select optimum DGPS station.
Note: Use the manual mode for the following cases.
• It takes more than five (5) minutes to fix DGPS position.
• The external beacon receiver cannot select a station automatically.
3.2.1 Manual beacon setup
How to set the differential corrections to use
1. Press the MENU/ESC key open the main menu.
2. Select [8 System Setting].
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35
2013. 11. 01 01 : 35
OK 2013. 11. 01 01 : 35