Furuno GP-170 - How to Set the Beacon Station

3. ADJUSTMENTS
3-4
3. Select [6 Beacon/SBAS].
4. Select [1 Mode].
5. Select [3 GNSS+Internal Beacon].
How to set the beacon station
1. Press the MENU/ESC key open the main menu.
2. Select [8 System Setting] then [6 Beacon/SBAS].
3. Select [3 Beacon Station].
4. Select [2 Set Parameter].
5. Select [1 Frequency].
6. Enter frequency in four digits (283.5 kHz to 325.0 kHz).
7. Move the cursor to select [Enter].
8. Press the NU/CU ENT key.