Furuno GP-170 - 2. Plotter Display Overview and Track Management; 2.1 Display Settings and Customization

3. ADJUSTMENTS
3-5
9. Select [2 Bit Rate].
10. Press the cursorpad (S or T) to select baud rate; 25, 50, 100, 150 or 200 bps.
11. Press the NU/CU ENT key.
12. Press the MENU/ESC key to close the main menu.
3.2.2 Automatic beacon setup
How to set the differential corrections to use
1. Press the MENU/ESC key open the main menu.
2. Select [8 System Setting] then [6 Beacon/SBAS].
3. Select [1 Mode].
4. Select [3 GNSS+Internal Beacon].
How to set the beacon station
1. Press the MENU/ESC key open the main menu.
2. Select [8 System Setting] then [6 Beacon/SBAS].
3. Select [3 Beacon Station].
4. Select [1 Auto].
5. Press the MENU/ESC key to close the main menu.