3. ADJUSTMENTS
3-18
2) Enter the Ethernet SFI with the cursorpad and the numeric keys (combination-
of two alphabets and four numerals). SFI (System Function ID) is an identifi-
cation code used by the system.
Note: Set the SFI to eliminate overlap with other ones.
3) Move the cursor to [Enter] then press the NU/CU ENT key. Go to step 9.
6. Select [1 HDG].
7. Select [7 User Priority].
8. Enter the priority for heading data among [1] (Data1), [2] (Data2) or [4] (Data4)
with the numeric keys.
9. Set the input data for [2 STW] (speed through water), [3 SST] (sea surface tem-
perature) and [4 DPT] (water depth) as well.
10. Press the MENU/ESC key to close the main menu.
High Low
To Next Page
Loading...
