FusionServer 2288H V5 Server
Technical White Paper
Copyright © xFusion Digital Technologies Co., Ltd.
A.5 RAS Features
The server supports a variety of Reliability, Availability, and Serviceability (RAS)
features. You can configure these features for better performance.
For details about how to configure these features, see the Server Purley Platform
BIOS Parameter Reference.
Table A-7 Supported RAS features
Corrected Machine Check
Interrupt (CMCI)
Corrects error-triggered interrupts.
Identifies faulty DIMMs to facilitate
isolation and replacement of the faulty
DIMMs.
Memory Thermal Throttling
Automatically adjusts the memory
temperature to prevent the memory from
being damaged due to overheat.
Uses some memory ranks for backup to
prevent the system from breaking down
due to uncorrectable errors.
Memory Address Parity
Protection
Detects memory command and address
errors.
Memory Demand and
Patrol Scrubbing
Corrects correctable errors upon
detection. If these errors are not
corrected in a timely manner,
uncorrectable errors may occur.
Provides high reliability for the system
via mirroring.
Single Device Data
Correction (SDDC)
Corrects single-chip multi-bit errors to
improve memory reliability.
Degrades and rectifies memory faults to
improve memory availability.
Optimizes data flow distribution to
reduce the error probability and improve
memory data flow reliability and address
error detection.
PCIe Advanced Error
Reporting
Provides a PCIe advanced error
reporting mechanism to improve server
serviceability.
Intel UPI Link Level Retry
Provides a retry mechanism to improve
the reliability of UPI links.
Intel UPI Protocol
Protection via CRC
Provides cyclic redundancy check
(CRC) protection for UPI data packets to
To Next Page
Loading...
General