Fusion FusionServer 2288H V5

FusionServer 2288H V5 Server
Technical White Paper
5 Hardware Description
Issue 11 (2023-04-30)
Copyright © xFusion Digital Technologies Co., Ltd.
37
⚫
DCPMM DDR-T fault tolerance
⚫
Faulty DCPMM isolation
5.5 Storage
5.5.1 Drive Configuration
Table 5-10 Drive configuration
Configuratio
n
Maximum
Number of
Front Drives
Maximum
Number of
Rear Drives
Maximum
Number of
Built-in
Drives
Normal Drive
Management
Mode
8 x 2.5" drive
pass-through
configuration
1
⚫
Front drive:
8 x 2.5"
− Slots 0
to 7
support
only
SAS/SA
TA
drives.
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drives.
-
1 x screw-in
RAID
controller card
Screw-in RAID
controller
card: RAID
controller card
connector
installed on
the
mainboard.
8 x 2.5" drive
pass-through
configuration
2
⚫
Front drive:
8 x 2.5"
− Slots 0
to 7
support
only
SAS/SA
TA
drives.
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drives.
-
1 x PCIe
plug-in RAID
controller card
PCIe plug-in
RAID
controller
card: must be
installed in slot
1 or 3.
8 x 2.5" drive
pass-through
configuration
3
⚫
Front drive:
8 x 2.5"
− Slots 0
to 7
support
only
SATA
drives.
-
-
PCH
pass-through
8 x 3.5" drive
pass-through
configuration
1
⚫
Front drive:
8 x 3.5"
− Slots 0
to 7
support
only
SAS/SA
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
-
1 x PCIe
plug-in RAID
controller
card
a
The PCIe
plug-in RAID
controller card