Operating Procedures for Immobilizer Registration
71
7-3 Operating Procedures for Immobilizer Registration
7-3-1. Registration menu
Select Registration button from the IMMOBILIZER system.
Registration menu is displayed.
The 1st key Registration
Register the key information for the IMMOBILIZER
system with no registered keys is registered.
→ go to section 7-3-2.
VIN Registration
Send the VIN from Engine system and store the
information
on the IMMOBILIZER system.
→ go to section 7-3-3.
Additional key Registration
Add and register the information for new key to the
IMMOBILIZER system.
→ go to section 7-3-4.
Erasing Registered key
The key information registered on the IMMOBILIZER
system is erased. Except the Master key information with
key-on currently.
→ go to section 7-3-5.
7-3-2. The 1st key Registration
(1) The confirming screen if the 1st registrable key is at the
“ON” position is displayed.
--- OK : go to section (2).
(2) The screen of the 1
st
key registration is displayed.
Register both Master key and Sub key.
--- The 1
st
key registration
To Next Page
Loading...