PRE-DELIVERY INSPECTION PROCEDURE
1-16
37. DIFFERENTIAL CARRIER ATTACHING
BOLTS TIGHTNESS
Check the bolts attaching differential carrier to
axle housing for tightness (knock to check). If
they are loosed, tighten them to specification.
38. BODY MOUNTING BOLTS AND NUTS
TIGHTNESS
Check the body mounting bolts and nuts for
tightness (knock them to check).
If they are loosed, tighten them.
39. FRONT AND REAR WHEEL NUTS TIGHT-
NESS
Check front and rear wheel nuts for tightness
(knock them to check).
If they are loosed, tighten them to specification.
40. TIRE PRESSURES
(INCLUDING SPARE TIRE)
Check the tire pressures while the tires are cold.
If there are metal pieces, stones and other for-
eign objects caught in the tread grooves, remove
them.
Check that the spare tire is installed properly.
41. TRANSMISSION OPERATION
Check the operation of transmission and gear-
shift lever in all ranges.
FUSO ASCENT-ALEJANDRO CANTO
To Next Page
Loading...