FUTABA 32MZ-WC - When copying data from Gyro A to Gyro B

170
＜
Model Menu (Airplane/Glider)
＞
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
1.Select“Gyrosetting”onthelastpageof
AirplaneModelMenu
3.Homescreenisdisplayed
ToBasicmenu
◆ WhencopyingdatafromGyroAtoGyroB
ConnectthegyroAtotheT32MZ-WCandpress[Start].(EnterthedataofAintoT32MZ-WC)
ConnectGyroBtoT32MZ-WCandpress[GYSettingsTransfer].(PutdataonAintogyroB)
2.Select"Start"
Select"Start"

Thiswilldownloadthegyrodatato
theT32MZ-WC.
*Atthistime,ifGyroisnotconnectedto
T32MZ-WCbywire,thisscreenappears.
Tap"Yes"todisplaytheGYA553datasavedinT32MZ-
WC.
1
3
2
SETTING
When"GYSettingsTransfer"is
selected,thegyrosettingdatasaved
inT32MZ-WCiswrittentothegyro.
IfyoupressStarthere,theBdatawillbedownloadtothe
T32MZ-WCandtheAdatawillbelost.
XX
$,53/$1(
*/,'(5