Brake Mixing
5
(Steering mixing)
Use this function when you want to weaken
the brakes when steering was operated.
Tap the value button of the "Brake 1 or 2,3"
[Left]. Value input buttons appear on the
screen. use the [+] and [-] buttons to adjust
the rake amount.
Tap the value button of the "Brake 1 or
2,3"[Right]. Value input buttons appear on
the screen. use the [+] and [-] buttons to
adjust the rake amount. The smaller the
value, the weaker the front brakes. Set
value
"
100" is the state in which steering
mixing is not performed.
- The mixing amount can be adjusted in a range from
0 to 100.
6
When finished, return to the Mixing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brake rate (Mixung )
100~0
Initial value:100
The dial select function can control the brake 1,2,3 rate , delay amount and EXP setting
using digital dial or digital trim. (page 66)
Dial / Trim Setting
1M23N32602_7PX_E.indb 109 2017/08/02 14:17:30
To Next Page
Loading...
