31
<System Menu>
Trainer
Trainer system startin
X-40 trainer system makes it possible to chose
w
at the instructor's transmitter. Because the switch
and rate of each channel can be set, the training
level. Two transmitters must be connected b
tional Trainer Cord, and the Instructors’
eration, as described below.
When the Instructor activates the trainer switch,
e
corrections while the student has control
nto an undesirable situation.
6HWWLQJGDWDDUHVWRUHGWRPRGHOGDWD
VZLWFKHV
NOTE: This trainer s
transmitter and a conventional
if the channel order is different. It
to match the channel order in
set the FX-40 to the modulation
WKH,QVWUXFWRUV·WUDQVPLWWHU
When the Instructors’ transmitter is a T14MZ
3. Be sure that all channels work correctly
QHU@EXWWRQDWWKH6\VWHP0HQXWR
0=
Non-corresponding types of transmitters