Driving information (7-inch instrument cluster)
When the engine start/stop button is at “ON”
position, press or button on the right of the
steering wheel to switch to the driving information
screen, and then turn the OK button upwards or
downwards to switch the display information
screens.
NOTE
• When no valid information is received, the
driving information screen will not display
valid data.
• The data on the long-term memory screen
can be reset by pressing and holding the
OK button.
•
In case of any discrepancy in the driving
information screen, the actual car
configuration shall prevail.
Tire pressure & temperature
Instantaneous fuel
consumption
Tire pressure & temperature
button for resetting
Inst ant aneous fuel co nsumpt io n
4. Operation of Systems and Equipment