GAC GA8 - Page 45

Menu setting (7-inch instrument cluster)
When the car speed is zero with the engine
start/stop button set to “ON” position, press the
or
button on the right of the steering wheel to
switch to the menu setting screen, where you can
turn the OK button upward or downward to move
the cursor for selection, press the OK button to
enter the sub-menu, and then press the OK button
for selection, confirmation or cancellation.
NOTE
• If menu setting is carried out when the car
speed is not zero, the warning message
"Safe driving tip: setting needs to be
performed when the car stops" will be
displayed; if the warning message appears
for more than 5 s, the instrument cluster will
automatically switch to the driving
information screen.
•
In case of any discrepancy in the menu
setting, the actual car configuration shall
prevail.
Driving information
Trip meter
Backlight
Unit
Press the
OK button
Press the
OK button
Press the
OK button
Back
Outside temperature
Battery voltage
Speed
Instantaneous fuel consumption
Short
-term memory
Long
-term memory
Tire pressure & temperature
Confirm
Cancel
Back
Temperature
Pressure
Fuel
consumption /
mileage
Default setting
Press the
OK button
Confirm
Cancel
39
4. Operation of Systems and Equipment