Turn signal lamp
– When the engine start/st
op button is in the
"ON" position, if you turn the lamplight
combination switch up or down to the limit
position ①
and turn on the right or left turn
signal lamp, the corresponding indicator lamp
or on the instrument cluster will flash.
Lamp flashing for lane changing
– In case of lane changing or overtaking, if you
turn the lamplight combination switch up or
down to the position ② and then release it to
the original position, the corresponding turn
signal lamp and the indicator lamp or
on the instrument cluster
will flash 3 times.
– If you turn the lamplight combination switch
up or down and hold it at the position ②
, the
corresponding turn signal lamp and the
indicator lamp or
cluster will flash continuously. Releasing the
swi
tch to the original position can stop the
flashing.
NOTE
If the corresponding indicator lamp or
on the instrument cluster flashes faster, one of
the turn signal lamps may be faulty, please go
to the GAC Motor authorized shop for
inspection in time.
Light switch
When the engine start/s
top button is in the "ON"
position, turn the light switch ①
to activate or
deactivate AUTO (automatic headlamp on/off
function)*, (position lamp), and (low
beam).
If the light switch is turned to the "OFF" position,
all lamps will be turned off.
4. Operation of Systems and Equipment
To Next Page
Loading...
