AUTO (automatic headla
mp on/off function)*
– Turn the light switch to the AUTO position to
activate the automatic headlamp on/off
function.
NOTE
• If the automatic headlamp on/off function is
activated, the car will automatically turn on
or off the headlamp according to the
ambient light. When the ambient light
gradually becomes dark, the position lamps
and the low beam will be turned on
simultaneously; when the ambient light
gradually becomes bright, the position
lamps and the low beam will be turned off
simultaneously.
• This function can be adjusted by setting the
AV system "System Settings → Body
Accessories → Exterior Light → Automatic
Headlamp On/Off Sensitivity".
NOTE
•
If the instrument cluster displays "Sensor
Failure, Please Manually Control Light", the
system will keep the low beam on for the
sake
of safety. At this time, you should
manually control the light and go to the
GAC Motor authorized shop for inspection
in time.
•
The automatic headlamp on/off function
may be affected in the haze environment,
so please manually control the light in this
case.
Daytime running lamp*
–
When the engine is started and the position
lamps are off, the daytime running lamps can be
automatically turned on; when the position lamps
are turned on or the engine is shut down, the
daytime running lamps can be automatically
turned off .
NOTE
This function can be activated or deactivated by
setting the AV system "System Settings
→ Body Accessories → Exterior Light →
Daytime Running Lamp (Car Settings → Light
Control → Daytime Running Lamp)”.
Position lamp
– If you turn the light switch to the
position,
the position lamps, instrument panel lamps,
license plate lamps and other lamps will be turned
on, and the corresponding indicator lamp
on
the instrument cluster will come on.
4. Operation of Systems and Equipment
To Next Page
Loading...
