15
1. Press Enter until appears.
2. Click Set
. A flashing arrow will appear at the bottom of the display.
3. Press
or to move the arrow to the valve number you want to
program.
4. Press ENTER until the icon
appears.
5. Click Set
. The hour digit will flash. Press or until the
number 2 will be displayed.
Click Set . The minute digit will flash. Press or until the
number 30 will appear in units of minutes.
6. Press Enter
. The days icon will be displayed.
7. Click Set
. A flashing arrow will appear at the top of the display,
below Monday. Press Set
until the flashing arrow appears below
Tuesday, and then click on the plus symbol
. The arrow below
Tuesday will stop flashing and move to the right, to Wednesday. Press
Set
twice to move the arrow to Friday, and then click Plus .
8. Press Enter
; the start time STARTI will be displayed. Click Set
. The hours digit will flash.
9. Set the start time to 08:00 by clicking on the plus
or minus
sign. Repeat this step to set the second start time (2) STARTII to 13:00,
and the third start time (3) STARTIII to 19:00.
10. Press Enter
for the fourth start time (4) START IV will be displayed.
Press
and the hours digit will flash.
11. Press the plus
or minus sign until OFF is displayed. The fourth
valve opening is now canceled.
To Next Page
Loading...
Need help?
General
