Galcon 6100 Series User Manual

16
5.1 One-time Irrigation
In this operation we program the controller to run the irrigation system
once, for the duration and the time set.
Note: The duration is determined according to Section 4.4
1. Press ENTER
until appears.
2. Press Set
several times (for all days of
the week) until the
icon appears and
the word ONCE blinks in the display.
3. Go to Section 4.5 to determine the start day
and time.
5.2 Periodic Irrigation
In this operation we program the controller to operate the irrigation system
once for a fixed number of days, for the time allotted to irrigation.
Note: The duration of the valve opening is determined according to
Section 4.4.
1. Press Enter
until the icon
appears.
2. Press Set
repeatedly (for all days of
the week) until the periodic symbol
appears, and the word Once will flash on
the display.
3. While the display is blinking, press
or
. The display will show the number of
days between irrigations (irrigation cycle). For example, if you set 2 days,
irrigation will take place every two days for the determined time.
5. Additional Functions

Galcon 6100 Series Specifications

General

Brand	Galcon
Model	6100 Series
Category	Controller
Language	English