Page 63
E/E
Will activate for the duration of the entry exit times.
Bell
Will activate when the bell is triggered and will cut of with the bell time.
Alert
Will activate when an alert zone is triggered.
Any Fire
Will activate when a fire zone is triggered.
Any Panic
Will activate when a panic zone is triggered will also activate when a duress code is
entered.
Alarm
Will activate when panel is in alarm and will reset when a code is entered.
Alarm B
Will activate when a second zone has alarmed (The activation of this output is
dependent upon other system attributes) Please refer to DD243 Section .
Alm Abort
Will activate when the panel is in alarm and unset within the programmed abort time.
O/C Cleaner
Used for sending open and closing when a cleaner code is used.
Cleaner Set
Will active when a cleaner code is used to set the system.
Gen Tamper
Will activate with bell / control / keypad / zex tampers.
Zone 24Hr
Will activate when a 24Hr zone is triggered
Part Set
Will activate when the system is part set or when a zone is removed (omitted).
Strobe
Will activate when the strobe is triggered.
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:20 Page 63
To Next Page
Loading...
