Page 89
59) Enter the Zone number you require for Clnr
followed by Yes.
The display will show, for example:-
60) To add more Zones to Clnr repeat from Step 58.
61) When you have finished adding Zones to Clnr
press Yes.
62) The display will show:-
Two Chime suites are available on the GardTec
800
series control panels so for
example you would have the Front Door on Zone 1 programmed into Ch1 and the
Rear Door on say Zone 6 programmed into Ch2. When the system is Unset
opening the Front Door will produce a Chime. Opening the Rear Door will
produce a different Chime.
It should be noted that Chime must be programmed as On from the user mode.
Please refer to the User Manual for details.
63) If you do not wish to enter Ch1 Zone press Yes
and jump to Step 68.
Otherwise
64) Press No. The display will show:-
Clnr 007
Ch1 None
Enter Zone # _ _ _
then +YES or -NO
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:21 Page 89
To Next Page
