Page 88
51) If you do not wish to enter PT-2 Zones press Yes
and jump to Step 56.
Otherwise
52) Press No. The display will show:-
53) Enter the Zone number you require for PT-2
followed by Yes.
The display will show, for example:-
54) To add more Zones to PT-2 repeat from Step 52.
55) When you have finished adding Zones to PT-2
press Yes.
56) The display will show:-
Zones entered as Cleaner will be Removed (Omitted) when a Part Set 0 is
performed and the added to the Part 0 set system when a Cleaner level code is
entered.
Or
When a system is Full Set and a Cleaner level code is entered the Cleaner zones
will be removed (Omitted).
57) If you do not wish to enter Clnr Zones press Yes
and jump to Step 62.
Otherwise
58) Press No. The display will show:-
Pt-2 005
Clnr None
Enter Zone # _ _ _
then +YES or -NO
Enter Zone # _ _ _
then +YES or -NO
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:21 Page 88
To Next Page
