Page 98
14) Use the No key to scroll through the Setting Modes.
15) When the Setting Mode you require is displayed
press Yes. The display will show:-
16) Repeat for all Areas. After Area 7, the display
will show:-
17) Press No. The display will show:-
18) Press Yes. The display will show:-
19) Press No twice.
20) Enter the time you require as the Exit Time
(in seconds), followed by Yes.
The display will show, for example:-
21) Use the No key to scroll through the
Setting Modes.
22) When the Setting Mode you Require is displayed
press Yes. The display will show:-
23) Repeat for all Areas. After Area 7, the display
will show:-
Program Setting
for PART 1 set ?
Program Setting
for PART 2 set ?
Program Setting
for PART 2 set ?
P1-EXIT A2 =20s
=Set by TIME
P2-EXIT A1 =30s
=Set by TIME
P2-EXIT A1 = 20s
>Set by TIME
P2-EXIT A2 = 30s
=Set by TIME
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:21 Page 98
To Next Page
