CHAPTER 6: Using Your Hardware www.gateway.com
58
Installing an uninterruptible power supply
To install an uninterruptible power supply (UPS):
1 Click Start, then click Control Panel. The Control Panel window opens. If
your Control Panel is in Category View, click Performance and
Maintenance.
2 Click/Double-click the Power Options icon. The Power Options Properties
dialog box opens.
3 Click the UPS tab.
Help and Support
For more information about
uninterruptible power supplies, click
Start, then click Help and Support. Type
the keyword uninterruptible power
supply in the Search box, then click the
arrow.
4 Click Select. The UPS Selection dialog box opens.
5 Click the manufacturer and model of the UPS device, then click the serial
port where the UPS device is attached.
6 Click Finish, then click OK.
8511629.book Page 58 Wednesday, July 19, 2006 9:38 AM
To Next Page
Loading...
