CHAPTER 7: Using Your Software www.gateway.com
76
If you have more than one CD or DVD burner, select the burner, then click
Burn. The Burning dialog box opens and Power2Go burns the files to the
CD or DVD.
9 When a message tells you that the recording is complete, click OK to start
the LabelPrint program or Cancel to return to Power2Go.
Creating a video DVD
You can create video DVDs using Windows Media Player or CyberLink
Power2Go.
Creating a video DVD with Windows Media Player
To create a video DVD using Windows Media Player:
Important
TV programs that have been recorded
with the Media Player can be recorded to
DVD and replayed on another Media
Center computer or on a non-Media
Center computer that has a DVD player
and DVD decoder software (such as
PowerDVD) installed. The non-Media
Center computer must also have
Windows XP with Service Pack (SP) 1 or 2,
Windows Media Player 9 or later, and the
Windows patch Q810243 Update.
We recommend that you do not use your
computer for other tasks while creating
CDs or DVDs.
If you record copyrighted material on a
CD or DVD, you need permission from the
copyright owner. Otherwise, you may be
violating copyright law and be subject to
payment of damages and other
remedies. If you are uncertain about your
rights, contact your legal advisor.
1 Insert a blank, writable DVD-R or DVD-RW disc into your recordable DVD
drive.
2 Press the Start button on the remote control. Media Player starts.
3 Click More Programs, then click Create CD/DVD.
8511629.book Page 76 Wednesday, July 19, 2006 9:38 AM
To Next Page
Loading...
