97
Configuring the audio jacks
www.gateway.com
Configuring the audio jacks
The audio jacks on your notebook and optional port replicator are universal
jacks. This means that they can be used for more than one purpose. For
example, universal jack 1 on the notebook can be a microphone jack, a stereo
in jack, or a stereo out jack. For more information on how each jack can be
used, see “Left Side” on page 3 and “Back” on page 269.
To use the audio jacks for something other than the default audio device, you
need to configure the audio jacks.
To configure the audio jacks:
1 Connect your audio device(s) to the notebook or port replicator universal
jack(s).
2 Click Start, All Programs, SigmaTel, then click SigmaTel Universal Jacks. The
Sigmatel Universal Jacks dialog box opens.
To Next Page
Loading...
