39
Connecting to a wired Ethernet network
www.gateway.com
Connecting to a wired Ethernet
network
Your notebook has a network jack that you can use to connect to a 10/100/1000
(gigabit) wired Ethernet network.
To connect to a wired Ethernet network:
1 Insert one end of the network cable into the network jack on the back
of your notebook.
2 Insert the other end of the network cable into a network jack. Ask your
network administrator to help you select the correct network jack.
Important Your notebook may be equipped with a built-in wireless
Ethernet emitter or you may have a wireless Ethernet
PC Card. For information about connecting to a wired or
wireless Ethernet network, see “Networking Your
Gateway M675” on page 205. For information about
installing a wireless Ethernet PC Card, see “Adding and
removing a PC Card” on page 256.
To Next Page
Loading...
