Gateway M675 - Inserting a CD or DVD

109
Using the CD or DVD drive
www.gateway.com
Inserting a CD or DVD
To insert a CD or DVD:
1 Press the eject button on the CD or DVD drive. After the disc tray opens
slightly, pull the tray completely open.
2 Place the disc in the tray with the label facing up, then press down carefully
on the disc until it snaps into place
Important Some music CDs have copy protection software. You may
not be able to play these CDs on your notebook.
Important When you place a single-sided disc in the tray, make sure
that the label side is facing up. If the disc has two playable
sides, place the disc so the name of the side you want to
play is facing up.
Activity indicator
Eject button
Manual eject hole