99
Recording and playing audio
www.gateway.com
Recording and playing audio
Use the following instructions to make an audio recording by speaking into a
microphone.
To make an audio recording:
1 Plug a microphone into the Microphone jack on your notebook. For the
location of the Microphone jack, see “Left Side” on page 3.
-OR
Plug a microphone into the Microphone jack on your port replicator. For
the location of the Microphone jack, see “Back” on page 269.
2 Click Start, All Programs, Accessories, Entertainment, then click Sound
Recorder
. The Sound Recorder opens.
3 Click (record), then speak into the microphone.
Important If you are configuring a jack for stereo in, and you want to
hear the input signal through your speakers, you must also
set up your notebook for audio pass through. Click Start,
All Programs, SigmaTel, then click Audio PassThru
Control Panel. The Pass Through dialog box opens. Make
sure that the Pass Through check box is selected. Click
X in the top-right corner of the dialog box to close it.
Rewind
Fast Forward
Play
Stop
Record
To Next Page
Loading...
