157
Using the optional memory card reader
www.gateway.com
To remove a memory card:
■ Make sure that the left-side modular drive status indicator (see “Status
indicators” on page 27) is off, then pull the memory card out of the
notebook.
Using the memory card reader externally
You can use the memory card reader without inserting it in the modular bay.
To use the memory card reader externally:
1 Plug the cable that has been provided into the port on the memory card
reader.
2 Plug the other end of the cable into a USB port on your notebook or port
replicator.
Important Do not use the remove hardware icon in the taskbar
to remove the memory card.
To Next Page
Loading...
