162
Chapter 7: Using Multimedia
www.gateway.com
6 Click the Settings tab.
7 Right-click the second monitor icon (labeled 2), then click Attached.
8 Click Apply.
9 Adjust properties such as Screen Resolution or Color Quality if necessary.
10 Click OK.
Important Press FN+F3 to switch between viewing the display on the
LCD panel and viewing the display on the projector or
monitor.
Important If an external monitor or projector is connected, your
notebook turns off the LCD panel, but does not enter
Standby mode, when the LCD panel is closed.
To Next Page
Loading...
