260
Chapter 15: Upgrading Your Gateway M675
www.gateway.com
To add or replace memory modules:
1 Follow the instructions under “Preventing static electricity discharge” on
page 258.
2 Turn off your notebook, disconnect the AC adapter and modem and
network cables.
3 Disconnect your notebook from the optional port replicator (see
“Disconnecting from the port replicator” on page 274).
4 Turn your notebook over so the bottom is facing up.
5 Remove the battery. For more information, see “Changing batteries” on
page 171.
6 Loosen the four memory bay cover screws, then remove the memory bay
cover.
To Next Page
Loading...
