CHAPTER 8: Troubleshooting
108
You see a “Not enough memory” error message
• Close all programs, then restart your notebook.
Memory card reader
Drive letter for the memory card slot does not appear
in the My Computer window
• Reboot your notebook.
Modem (cable or DSL)
The modem does not connect
• Make sure that the modem cable is plugged into
the Ethernet network jack and not the optional
modem jack. For the location of your network
jack, see “Left” on page 7.
• See the documentation that came with your
modem for additional troubleshooting
information.
Modem (dial-up)
Your modem does not dial or does not connect
• Make sure that the modem cable is plugged into
the optional modem jack and not the Ethernet
network jack. For the location of your modem
jack, see “Back” on page 10.
• Make sure that your notebook is connected to
the telephone line and the telephone line has a
dial tone.
To Next Page
Loading...
Need help?
General
