www.gateway.com
21
To connect to a cable or DSL modem or to a wired
Ethernet network:
1 Insert one end of the network cable into the
network jack on your notebook.
2 Insert the other end of the network cable into a
cable modem, DSL modem, or Ethernet network
jack.
Connecting the optional
dial-up modem
Your notebook may have a built-in 56K modem that
you can use to connect to a standard telephone line.
Tip
When using a cable with a sleeve over the plug, pull
the sleeve back to make sure that the plug locks into the jack.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger (for
example, No. 24 AWG) UL-listed or CSA-certified telecommunication
line cord for your dialup modem connection.
To Next Page
Loading...
Need help?
General
