www.gateway.com
85
Creating recovery discs
If your computer experiences problems that are not
recoverable by other methods, you may need to
reinstall the Windows operating system and
factory-loaded software and drivers. To reinstall using
discs, you must create the set of recovery discs
beforehand.
To create recovery discs:
1 Click (Start), All Programs, Gateway, then click
Gateway Recovery Management.
Gateway
Recovery Management
opens.
2 To create recovery discs for the hard drive’s entire
original contents, including Windows Vista and
all factory-loaded software and drivers, click
Create factory default disc.
- OR -
To create recovery discs for only the
factory-loaded software and drivers, click Create
driver and application backup disc.
Important
We recommend that you create each type of recovery
disc as soon as possible.
To Next Page
Loading...
Need help?
General
