Instructions for SL500DCL/SL800DCL
www.gatexpertstore.com
Figure 26
Running Speed Setting (L1)
Users can adjust the gate opening and closing speed according to the actual installation
and using condition.
A. Operation Instruction:
1. Press and hold “PROG” button for 3 sec. to enter into basic menu. Indicator light L0
will flicker once, then L1 will be steady on.
2. Press “SET” button once to enter into running speed setting. Indicator lights L1-L5
will show the current running speed. (The default is L5)
3. Press “+” or “-” button to adjust the running speed. Indicator lights L1-L5 will indicate
different speed status. The more the indicator lights are on, the faster the running speed
will be.
4. Press “SET” button to save and system will automatically exit. The indicator lights
L1-L5 will be on in sequence, then all will flicker once and off.
B. Operation Graphic Illustration
Press and hold “PROG” for 3 sec.
Slow Stop Distance Setting
Auto-close Function Setting
To Next Page
Loading...
