Installation
QS4 Technical Reference Manual 2.13
SL30 (–1) LED/Switch Card device
addresses
The device address format is GGSS for
switches and GGSSL for LEDs, where:
GG is the group number (01 for SL30, 02 for
SL30–1)
SS is the switch number
L is the LED number, where:
• 1 is the red Alarm LED
• 2 is the yellow Active LED
• 3 is the yellow Trouble LED
1
611162126
7121722272
3 8 13 18 23 28
9141924294
10 15 20 25 305
06-10 11-15 16-20 21-25 26-30
GG02
GG03
GG04
GG05
GG013
GG01
GG011, GG012
SL30
41 46 51 56
37 42 47 52 57
33 38 43 48 53 58
39 44 49 54 5934
40 45 50 55 6035
3631
32
06-10 11-15 16-20 21-25 26-30
GG02
GG03
GG04
GG05
01-05
GG01
SL30–1
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...