Operating instructions
3.4 QS4 Technical Reference Manual
Tasks that do not require you to log in
What is it you want to do This is how you do it
Get a list of smoke detectors that
may require servicing (DIRTY
attribute greater than 20%)
1. Press Menu.
2. Choose Reports > Maintenance > Dirty>20%.
3 Enter the panel number.
4. Choose Display to view the list on the CPU/Display unit.
— or —
Choose Printer to print the list.
Get the attributes for a single smoke
detector
1. Press Menu.
2. Choose Reports > Maintenance > Single Device.
3. Enter the panel number.
4. Choose Display to view the list on the CPU/Display unit.
— or —
Choose Printer to print the list.
Get the attributes for every smoke
detector on a single SLIC
1. Press Menu.
2. Choose Reports > Maintenance > Card Devices.
3 Enter the panel number.
4. Choose Display to view the list on the CPU/Display unit.
— or —
Choose Printer to print the list.
Perform a lamp test
1. Press Menu.
2. Choose Test > Lamp Test.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...