GE af-600 fp - Changing Data

Choose a parameter group from the Main Menu and Press [OK]. Then further
select the parameter sub-groups by using the up and down arrows and then
Press [OK].
The middle section of the keypad display shows the parameters. Press [OK]
to select parameters and now the display shows that selected parameter's
value.
7.1.6 Changing Data
1. Press [Quick Menu] or [Main Menu] key.
2.
Use [
▲
] and [
▼
] keys keys to find parameter group to edit.
3. Press [OK] key.
4.
Use [
▲
] and [
▼
] keys to find parameter to edit.
5. Press [OK] key.
6.
Use [
▲
] and [
▼
] keys to select correct parameter setting. Or, to move to digits within a number, use left or right arrow keys. Cursor indicates digit selected
to change. [
▲
] key increases the value, [
▼
] key decreases the value.
7. Press [Cancel] key to disregard change, or press [OK] key to accept change and enter new setting.
AF-600 FP High Power Operating Instructions
116
7