GE af-600 fp

Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
H-0# H-03 Restore Factory Settings [0] Normal operation All set-ups TRUE - Uint8 H-04 Auto-Reset (Times) null All set-ups TRUE - Uint8
H-05 Auto-Reset (Reset Interval) 10 s All set-ups TRUE 0 Uint16
H-06 Fan Operation [0] Auto All set-ups TRUE - Uint8
H-08 Reverse Lock [2] Both directions All set-ups FALSE - Uint8
H-09 Start Mode [0] Disabled All set-ups FALSE - Uint8
H-3#
H-36 Trip Speed Low [RPM] 0 RPM All set-ups TRUE 67 Uint16 H-37 Trip Speed Low [Hz] 0.0 Hz All set-ups TRUE -1 Uint16 H-4# H-40 Configuration Mode null All set-ups TRUE - Uint8 H-43 Torque Characteristics [3] Auto Energy Optim. VT All set-ups TRUE - Uint8
H-5#
H-50 Motor Magnetisation at Zero Speed 100 % All set-ups TRUE 0 Uint16 H-51 Min Speed Normal Magnetising [RPM] ExpressionLimit All set-ups TRUE 67 Uint16 H-52 Min Speed Normal Magnetising [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
H-6#
H-61 High Speed Load Compensation 100 % All set-ups TRUE 0 Int16 H-64 Resonance Dampening 100 % All set-ups TRUE 0 Uint16 H-65 Resonance Dampening Time Constant 5 ms All set-ups TRUE -3 Uint8
H-7#
H-70 Warning Current Low 0.00 A All set-ups TRUE -2 Uint32 H-71 Warning Current High ImaxVLT (P1637) All set-ups TRUE -2 Uint32 H-72 Warning Speed Low 0 RPM All set-ups TRUE 67 Uint16
H-73 Warning Speed High outputSpeedHighLimit (P413) All set-ups TRUE 67 Uint16
H-74 Warning Reference Low -999999.999 N/A All set-ups TRUE -3 Int32
H-75 Warning Reference High 999999.999 N/A All set-ups TRUE -3 Int32
H-76 Warning Feedback Low -999999.999 ProcessCtrlUnit All set-ups TRUE -3 Int32
H-77 Warning Feedback High 999999.999 ProcessCtrlUnit All set-ups TRUE -3 Int32
H-78 Missing Motor Phase Function [2] Trip 1000 ms All set-ups TRUE - Uint8
7.2.6 H-## High Perf Parameters
AF-600 FP High Power Operating Instructions
127
7