GE AF-650 GP - EMI Sources, Propagation, and Prevention; Sources of Electromagnetic Interference

[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
[73] Logic rule 3
[74] Logic rule 4
[75] Logic rule 5
[80] Logic Controller digital output A
[81] Logic Controller digital output B
[82] Logic Controller digital output C
[83] Logic Controller digital output D
[84] Logic Controller digital output E
[85] Logic Controller digital output F
[120] Local ref active
[121] Remote ref active
[122] No alarm
[123] Start command activ
[124] Running reverse
[125] Drive in hand mode
[126] Drive in auto mode
E-26 On Delay, Relay
Array [8](Relay 1 [0], Relay 2 [1], Relay 3 [2], Relay 4 [3], Relay 5 [4], Relay 6 [5], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Range: Function:
0.01 s* [0.01 - 600.00 s] Enter the delay of the relay cut-in time. Select one of available mechanical relays and OPCRLY Relay Option
Module in an array function. See par. E-24 Function Relay.
E-27 Off Delay, Relay
Array [8] (Relay 1 [0], Relay 2 [1], Relay 3 [2], Relay 4 [3], Relay 5 [4], Relay 6 [5], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Range: Function:
0.01 s* [0.01 - 600.00 s] Enter the delay of the relay cut-out time. Select one of available mechanical relays and OPCRLY Relay
Option Module in an array function. See par. E-24 Function Relay.
AF-650 GP Programming Guide
66
3