NB!
Stop the motor before performing this operation.
2.1.4 Display Mode
In normal operation, up to 5 different operating variables can be indicated continuously in the middle section: 1.1, 1.2, and 1.3 as well as 2 and 3.
2.1.5 Display Mode - Selection of Read-Outs
It is possible to toggle between three status read-out screens by pressing the
[Status] key.
Operating variables with different formatting are shown in each status screen
- see below.
The table shows the measurements you can link to each of the operating
variables. Define the links via par. K-20 Display Line 1.1 Small, par. K-21 Display
Line 1.2 Small, par. K-22 Display Line 1.3 Small, par. K-23 Display Line 2
Large, and par. K-24 Display Line 3 Large.
Each readout parameter selected in par. K-20 Display Line 1.1 Small to par.
K-24 Display Line 3 Large has its own scale and digits after a possible decimal
point. By larger numeric value of a parameter fewer digits are displayed after
the decimal point.
Ex.: Current readout
5.25 A; 15.2 A 105 A.
Operating variable:
Unit:
par. DR-00 Control Word hex
par. DR-01 Reference [Unit] [unit]
par. DR-02 Reference [%] %
par. DR-03 Status Word hex
par. DR-05 Main Actual Value [%] %
par. DR-10 Power [kW] [kW]
par. DR-11 Power [hp] [HP]
par. DR-12 Motor Rated Voltage [V]
par. DR-13 Frequency [Hz]
par. DR-14 Motor Current [A]
par. DR-16 Torque [Nm] Nm
par. DR-17 Speed [RPM] [RPM]
par. DR-18 Motor Thermal %
par. DR-20 Motor Angle
par. DR-30 DC Link Voltage V
par. DR-32 Brake Energy /s kW
par. DR-33 Brake Energy /2 min kW
par. DR-34 Heatsink Temp. C
par. DR-35 Drive Thermal %
par. DR-36 Drive Nominal Current A
par. DR-37 Drive Max. Current A
par. DR-38 Logic Controller State
par. DR-39 Control Card Temp. C
par. DR-40 Trending Buffer Full
par. DR-50 External Reference
par. DR-51 Pulse Reference
par. DR-52 Feedback [Unit] [Unit]
par. DR-53 Digi Pot Reference
par. DR-60 Digital Input bin
par. DR-61 Terminal 53 Switch Setting V
par. DR-62 Analog Input 53
par. DR-63 Terminal 54 Switch Setting V
par. DR-64 Analog Input 54
par. DR-65 Analog Output 42 [mA] [mA]
par. DR-66 Digital Output [bin] [bin]
par. DR-67 Freq. Input #29 [Hz] [Hz]
par. DR-68 Freq. Input #33 [Hz] [Hz]
par. DR-69 Pulse Output #27 [Hz] [Hz]
par. DR-70 Pulse Output #29 [Hz] [Hz]
par. DR-71 Relay Output [bin]
par. DR-72 Counter A
par. DR-73 Counter B
par. DR-80 Fieldbus CTW 1 hex
par. DR-82 Fieldbus REF 1 hex
par. DR-84 Comm. Option STW hex
par. DR-85 Drive Port CTW 1 hex
par. DR-86 Drive Port REF 1 hex
par. DR-90 Alarm Word
par. DR-92 Warning Word
par. DR-94 Ext. Status Word
AF-650 GP Programming Guide
17
2
To Next Page
Loading...
