GE AF-650 GP - Internal Frequency Converter Operation Principles; General Overview of Operation; Description of Converter Operation

K-13 Readout: Linked Set-ups
Array [5]
Range: Function:
0* [0 - 255] View a list of all the set-ups linked by means of par. K-12 This Set-up Linked to. The parameter has one
index for each parameter set-up. The parameter value displayed for each index represents which setups
are linked to that parameter setup.
Index
Keypad value
0 {0}
1 {1,2}
2 {1,2}
3{3}
4 {4}
Table 3.4: Example: Set-up 1 and Set-up 2 are linked
K-14 Readout: Edit Set-ups / Channel
Range: Function:
0* [-2147483648 - 2147483647] View the setting of par. K-11 Edit Set-up for each of the four different communication channels. When
the number is displayed in hex, as it is in the Keypad, each number represents one channel.
Numbers 1-4 represent a set-up number; ‘F’ means factory setting; and ‘A’ means active set-up. The
channels are, from right to left: Keypad, Drive bus, USB, HPFB1-5.
Example: The number AAAAAA21h means that the Drive bus selected Set-up 2 in par. K-11 Edit Set-up,
the Keypad selected Set-up 1 and all others used the active set-up.
3.2.3 K-2# Keypad Display
Define the variables displayed in the keypad.
NB!
Please refer to par. K-37 Display Text 1, par. K-38 Display Text 2 and par. K-39 Display Text 3 for information on how to write display texts
K-20 Display Line 1.1 Small
Option: Function:
Select a variable for display in line 1, left position.
K-21 Display Line 1.2 Small
Option: Function:
Select a variable for display in line 1, middle position. The options are the same as listed for par. K-2#.
K-22 Display Line 1.3 Small
Option: Function:
Select a variable for display in line 1, right position. The options are the same as listed for par. K-2#.
K-23 Display Line 2 Large
Option: Function:
Select a variable for display in line 2. The options are the same as those listed for par. K-2#.
AF-650 GP Programming Guide
30
3