DR-40 Trending Buffer Full
Option: Function:
View whether the logging buffer is full (see par. ID-1#). The logging buffer will never be full when par.
ID-13 Trending Mode is set to Log always [0].
[0] * No
[1] Yes
3.17.4 DR-5# Ref. & Feedb.
Parameters to view the reference and feedback status values.
DR-50 External Reference
Range: Function:
0.0* [-200.0 - 200.0] View the total reference, the sum of digital, analog, preset, bus and freeze references, plus catch-up and
slow-down.
DR-51 Pulse Reference
Range: Function:
0.0* [-200.0 - 200.0] View the reference value from programmed digital input(s). The read-out can also reflect the impulses
from an incremental encoder.
DR-52 Feedback [Unit]
Range: Function:
0.0* [-999999.999 - 999999.999] View the feedback unit resulting from the selection of unit and scaling in par. F-50 Reference Range, par.
F-51 Reference/Feedback Unit, par. F-52 Minimum Reference and par. F-53 Maximum Reference.
DR-53 Digi Pot Reference
Range: Function:
0.0* [-200.00 - 200.00] View the contribution of the Digital Potentiometer to the actual reference.
AF-650 GP Programming Guide
144
3
To Next Page
Loading...
