2.1 Safety precautions
I
ntroduction
ÄKTA ready XL is powered by mains voltage and handles materials that may be haz-
ardous. Before installing, operating or maintaining the system, you must be aware of
the hazards described in this manual.
The safety precautions in this section are grouped into the following categories:
• General precautions, on page 13
• Personal protection, on page 15
• Flammable liquids and explosive environment, on page 14
• Installing and moving, on page 15
• Operation, on page 18
• Maintenance, on page 20
General precautions
WARNING
R
isk assessment. Perform a risk assessment for any risks due to
the process or process environment. Evaluate the effects the use
of the product and the operational processes may have on the
classification of the hazardous area. The process might cause the
area to increase or the zone classification to change. Implement
the risk reduction measures needed, including use of personal
protective equipment.
WARNING
T
he customer must make sure that all installation, maintenance,
operation and inspection is carried out by qualified personnel
who are adequately trained, understand and adhere to local regu-
lations and the operating instructions, and have a thorough
knowledge of the product and the entire process.
2 Safety instructions
2
.1 Safety precautions
ÄKTA ready XL Operating Instructions 29281616 AE 13
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
