5.5 Install filter (optional)
I
ntroduction
The disposable flow kit is prepared to be fitted with a customer supplied filter. This
section describes how to install the filter to the flow kit.
Install filter
Step Action
1 Open the TC clamp by F
ilter position above pinch valve XV-025.
2 Open the two filter attachment straps.
3 Fit a customer supplied filter and attach it with the straps.
4 Connect the tubing to the filter top and bottom with TC clamps.
5 Preparation
5
.5 Install filter (optional)
ÄKTA ready XL Operating Instructions 29281616 AE 129
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
