Process component and meters
T
he table below describes the system components and flow kit components shown
in the flowchart.
Part Function
AE-121/TE-121 pH/temperature sensor
AE-131 UV cell
AE-151
and AE-152 Air sensors
AT-221 Air trap
BA1 to BA6 Buffer A inlets
BB1 to BB4 Buffer B inlets
C1 and C2 Column inlet and outlet, dependent of flow direction
CE/TE-101 Conductivity sensor
CE/TE-102 Conductivity sensor
FE-141 Flow meter cell
LEL-166 Air trap low level meter
LEH-167 Air trap high level meter
P-201.A Isocratic pump motor
P-201.B Gradient pump motor
PE-111 t
o PE-113 Pressure sensors
XV-001 to XV-006 Buffer A inlet valves
XV-011 to XV-014 Buffer B inlet valves
XV-021 Air trap inlet valve
XV-022 Air trap bypass valve
XV-024 Air trap outlet valve
XV-023 Air trap vent valve
XV-025 Filter inlet valve
XV-026 Filter bypass valve
3 System description
3
.3 Flowchart
ÄKTA ready XL Operating Instructions 29281616 AE 45
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
