GE AKTA ready XL - Page 66

No. Part Function
4 Column connec-
t
ion tubing
Tubing with one connector for the air trap tubing
and one outlet connecting to the outlet manifold.
The column connection part also has two connec-
tors for a column.
5 Outlet manifold Tubing with 6 connectors for outlets and one inlet
for connecting to the column connection tubing.
Flow kit components
T
he illustration below shows the components of the flow kit.
1
2
3
4
5
6 7
8
9
10
11
12
13
14
15161718
The following table gives a brief description of the flow kit components. Numbers in
t
he table refer to the illustration above.
Note: Several flow kit components are flow cells for sensors located on the sys-
t
em cabinet. In such cases, the tag technically refers to the sensors rather
than the flow cells/adapters. Here, however, the tags are used for identifica-
tion of both sensors and their corresponding flow cells.
3 System description
3
.5 Flow kits
3.5.2 Flow kit parts and components
66
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***