Workflow
T
he workflow for using UNICORN software for automatic control includes the follow-
ing general steps:
Step Action
1 Program a method run using the UNICORN software. It is possible to use
a
n existing method or modify an existing method to meet your run objec-
tives.
2 Start the run using the method you created.
3 Monitor the run's progress using the System Control module. All the data
about your run is displayed in the System Control module. You have a
choice of four different panes that can be open one at a time or all at once,
in separate parts of the window.
4 After completing the run, you can display the data in a detailed report using
extensive tools provided by the UNICORN Evaluation Module.
For information about other control software, refer to the product documentation
p
rovided with the delivery.
Warnings
Warnings are generated to warn operating personnel that process parameters have
exceeded preset high and/or low limits, and that the process method continues.
3 System description
3
.6 Process control software
74
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
