Step Action
2 Carefully slide the console arm over the system console rod (B) until it is
f
irmly attached. Keep the foam protection (A) in place when attaching the
console arm.
3 Remove the foam protection.
4 Fit the two cables to the connectors on the back of the console. The cables
w
ill click into place.
4 Installation
4
.3 Setup
4.3.1 Assembly
ÄKTA ready XL Operating Instructions 29281616 AE 89
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
