Parts lists, drawings and replacement
2001989-203C ApexPro™ Telemetry 7-29
164A
19. Using a phillips screwdriver, remove the screw securing the RAID card in the
slot.
047A
20. Remove the RAID card from the slot.
033A
21. Using a phillips screwdriver, remove the top screw securing the L bracket to the
top of the CPU module. Loosen the bottom screw securing the bracket and pivot
the bracket 90°.
020A
22. Disconnect the power cable connector from the CPU module.
Loosen bottom
screw
Remove top
screw
To Next Page
Loading...
